High power factor LED flood light 100w has an 800 lumen with a viewing angle of around 110 degrees. The led floodlights with CCT can provide super bright like cold white, natural white, and warm light for different area selection. Die-cast aluminum provides a reasonable structure of heat dissipation slot on the back of the body so that the lamp life keeps longer, high transparent glass with high-temperature resistance, not easily damaged.
IP65 protection rating can totally protect against the ingress of dust and water from any direction. Perfect for both indoor and outdoor. It also has an operating temperature of -20 to 50 degrees, Quick installation bracket can be installed individually or combined with multiple lights to be installed on poles over 20m in height to form a high pole lighting device, can install on wall mounting, ground mounting, and ceiling mounting.
Product Features
> Body: Durable aluminum die-casting
> Coating: Electrodusting with strong adhesive
> Glass: Strong tempered glass IK08
> PCB board: High quality aluminum PCB board pass 1500V test
> LED source: 2835SMD by SANAN
> Cable: Standard by HO5RN-3*1.0 m2
> Screw: 304 stainless steel at outside
Specifications
Item Code | ZH-FDC100W-F / XR-FDC100W-F | Viewing angle | 110° |
Power: | 100W | Size: | 250x35x222mm |
Voltage: | AC200-260V 50/60HZ | Material: | Aluminum die-casting |
Power Factor: | >0.9 | IP: | IP65 |
Luminous: | 80LM/W | pcs/ctn | 10 |
CRI: | 80 | ctn size (cm) | L53×W27×H24.5 |
CCT: | CW,NW,WW | cbm/ctn | 0.035 |
Color for body: | black/white | G.W | 14.1kgs |
Cable: | 0.15m H05RN-F3G 0.75mm2 rubber cable | N.W | 13.6kgs |
LEDs | 2835SMD | Warranty | 2 years |
MOQ | 1000 |
Application
> Factories
> Warehouses
> Workshops
> Gymnasium & Sports Stadium Lighting
> Station, garage, parking
> Billboard
> Subway, tunnel
FAQ
Q1. Which certification do you have?
We have the certification are the following: CE, RoHS, and ERP. Factory with ISO9001, meanwhile we are applying for BSCI.
Q2. Do you have the ability to do independent research and development?
Yes, we have our own technical team in Shanghai which special do R&D for driver solution.
Q3. If I have a question I would like advice on how to contact you?
You can sns platform or directly through major inquiry and send e-mail to consult us. And we will reply to you in detail within 24 hours.
Q4. Is it convenient to visit your factory?
Of course, that’s our pleasure if you can come and visit us.
