Solar-powered SMD wall light is with updated manufacturing technique, we choose transparent PC lens but use no direct glue, that makes sure stable quality with lifespan. Constantly improved quality and details of products are the forever pursuit of ZEHAI.
IP65 Waterproof and Durable
solar powered SMD wall light is made of high-quality PC+ABS, it can withstand any weather such as sunny, rainy, snow, hot or frosty.
Efficient and Environmentally Friendly
Solar-powered SMD wall light converts solar energy into electricity by being exposed to the sun every day. The photoelectric conversion efficiency is about 12~18%. And the working time under full power can be over 10 hours, solar-powered SMD wall light can help you save a lot of electricity bills. The lithium battery no need to be replaced as it has the charge-discharge protection.
Attention
1. Solar panel surface must be kept clean to collect sunlight effectively;
2. The built-in battery would be out of power if there is no good sunlight for several days. Thus the light may not light up at night. It will get power if the sunny day comes and light up after three days of charging;
3. Under extreme cold temperatures, or in a cloudy, rainy, snowy day, the battery may not be fully charged. In such cases, the solar lamp may not stay bright long;
4. To better keep the waterproof feather, do not disassemble the product.
Specifications
Model | ZH-SLW102 |
Color | Black |
LED Number | 128pcs |
Battery | 1200mAh |
Solar Panel | 5.5V 0.65W |
Lumens | 147lm |
Waterproof | IP44 |
Charging Time | 6-8hrs by bright sunlight |
Working Hours | Induction 150 times |
Housing Material | ABS+PC |
Size | 115x112x48mm |
Application Places
Deck Fence, Post Door, Wall Yard and Garage Yard, Garage Deck, Pathway Porch Lamp
FAQ
Q: If I have a question I would like advice on how to contact you?
You can sns platform or directly through major inquiry and send e-mail to consult us. And we will reply you in detail within 24 hours.
Q: Can you produce according to the samples?
Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q: How to deal with the fault?
If the problem caused by manufacturing quality, we will change and replace it in free.
Q: Can you send products to my country?
Yes, we can arrange different shipping ways according to the quantities and your opinions. If you have your own forwarder, that will also be fine.
Q: Can I have my own packaging?
Yes, it just need extra cost, and we could help you design or you can offer the sketch. And the MOQ is different for different styles.
